How To Make A Shaker Cake Topper

Accept you been looking for a cake topper that could brand a simple cake await beautiful? And then look no further. For this project, we are scrapping the ordinary 1-layer cake topper and opting for a 3D layer blueprint. In addition, we will add embellishments as a filler to create a shaker cake topper, an upgraded version of the regular cake topper!

Materials:

• Cardstocks – Become ane white cardstock and 4 colored cardstocks that complement each other. To make it easier for color combinations, buy a pad or pack of cardstock in assorted shades of the color you want to utilize. For example, I am using Rose and Coral cardstocks from CraftSmart, which you can buy at Michael'due south in the US.
• Acetate Sheet – Utilise any clear acetate that is not likewise flimsy.
• Shaker Fillers – Employ any small-scale crafting embellishments for fillers. I am using foam beads (tiny foam balls) in pinkish and white, pink sequins, pink and gold tube confetti, and mesomorphic heart-shaped glitter for this projection. You can as well add together minor buttons, glass beads, glitters, and polymer clays. These items tin be found at Dollar Tree, Michael's, Joann'south, Hobby Entrance hall, or any craft shop.
• Lollipop Stick – Utilise either a white or articulate lollipop stick. A firm stick will hold the filled-cake topper than paper harbinger. You tin can detect these at the baking aisle of stores or guild them at Amazon.

Y'all will also demand these:

• Cutting machine – Use any cutting machine you have, similar the Silhouette or Cricut. I am using my Cricut Maker for this project.
• Design Software – Use any software that your cutting automobile uses. Since I am using a Cricut machine, I am using Design Space.
• Cutting Mat – Since nosotros just employ cardstocks, the regular mat (bluish cut mat for Cricut) is adequate.
• Foam Tape, Double-Sided – Use this to create a space between the two layers of cardstocks and so the fillers can motion around when the cake topper shakes.
• Tape, Double-Sided – Utilise tape the acetate to the cardstock every bit a barrier to keep the filler from coming out of the cake topper.
• Glue Gun and Mucilage Stick – To mucilage the lollipop stick on the back of the topper.
• Glue – Put the white and colored groundwork cardstock together to make the back thicker and sturdier. Y'all can use any crafting newspaper glue, but I use BearlyArts mucilage for block toppers that I brand.
• Scissor – Utilise this to cut the tapes if needed.

Where to find these items in the US:

Yous can find all these items at any arts and crafts stores in the Us like Michael's, Joann'south, Hobby Lobby, the Dollar Tree stores, or Amazon. Lollipop sticks can also be plant in the blistering aisle of a store.

Instructions:

ane. Clean and Prep

• Clean the surface area or table you will use to make infinite for your items for this project.
• Get the cutting auto ready and gather all the materials and tools needed.

2. Download and Cutting

Nosotros are making a shaker cake topper for this project, so we are using 3D birthday designs instead. The layered components of the 3D design are a great way to create the shaker.

• Download Birthday Love 3D Layered by Slim Studio. Brand sure to unzip the file and save layers iv, 2, and 1 only. Note: Design Space does not accept files in a zip folder.

• Open Cricut Design Space and upload the files.
• Resize and cutting to centre shape

The 3D layered blueprint is prepare to be put in a frame, hence, the squared background. To arrive a cake topper, we need to cut the image so that merely the heart shape and border are left.

A. Open Layer 1 and click on contour.

B. Hide all contours except the two images that brand the center shape. Your image should wait like the i beneath.

C. To fill up the white space for like shooting fish in a barrel commencement, click the shape push button on the left side of the Cricut Design Space to create a circle. Then, carefully fill in the expanse, particularly the edges, clicking weld each time yous fill the space with a shape.

D. Click the starting time characteristic, slide the bar to the correct, or type in .5 and click employ.

East. Dissever the offset you created and hide the paradigm we used to get in.

F. Change the color of the offset to a light color to make it easy to see it once nosotros employ this to trim all the files.

Yard. Make five duplicates, i is to hide for hereafter use, and the rest are to use for the layers.

H. Open Layer 1 and size it to 7 inches.

I. Place the showtime image to the back of Layer one. You can use the grid to guide yous on placement to make sure information technology is centered.

J. In one case you have the right placement, select the offset and Layer one and click the slice button.

Yard. Delete all files from the slice, except the layer that has the color yous chose for the offset.

I. Repeat the previous ii instructions for Layers 2 and 4, and change the colors to get in easier to know which color cardstock goes to which image.

Grand. For the other two starting time images, change the colors and utilize unlike colors than Layers ane, 2, and iv.

North. Click on relieve or salve as if you lot take not done so. Send it to the car to be cut.

iii. Put Together and Fill

You should accept six pieces total; five are dissimilar colored cardstocks and 1 acetate. 3 are each layer, and the other iii are the heart shapes.

• Glue the white middle-shaped cardstock and the cake topper'south background. Doing this makes the back thick and sturdy. Put it on the side for now.

• Place the Layer ii behind up, and and then put the acetate on peak. Nosotros will use Layer 2 every bit our guide when placing the double-sided tape to ensure that it is covered when we put all layers together.

• Apply double-sided tape on the edges, ensuring in that location is no space for the filler to sneak out.
• Once all the edges are covered with tape, grab Layer 4 and place it face-up on the table. Then put the acetate on top of the layer.

• Flip the slice, acetate at the bottom, and use double-sided foam tape. Brand two stacks to have more infinite for the fillers to move around.

• Do not take out the protective canvas when you are washed with the second stack, so the gluey office is not exposed.
• Grab all the filler you will employ and advisedly cascade them. Ensure that you are leaving space and not overstocking it.

• When you are washed filling it, pull the protective sheet of the foam lath and grab the backside you put on the side earlier.
• Carefully place the colored cardstock on acme of Layer 4, ensuring y'all are not pressing too hard and flattening the cream.
• Flip the topper, so the acetate is on top.
• Catch Layer ii, apply some double-sided foam tape cut pieces, and stick it on top of the acetate.
• Take hold of Layer i, apply some cut pieces of double-sided foam record, and stick it on top of Layer 2.

• Grab your glue stick and turn it on.
• Flip the shaker cake topper, white dorsum facing up.
• Take hold of the lollipop stick and utilise gum to ii.five inches of the stick, starting from the elevation.
• Speedily place the stick, making sure it is i to 1.five inches away from the meridian, and the stick is straight and centered.

4. Now you are ready to employ the cake topper!

The shaker cake topper is fun to make and a peachy fashion to customize a block topper more than. You can add embellishments and employ colors that match the theme of the party. It is definitely an upgrade from the regular cake toppers!

Have you tried to practise this project? How was it? Permit me know in the comments below!

Source: https://www.creativefabrica.com/the-artistry/3d-crafting/how-to-create-a-shaker-cake-topper/

Share this post